SWISSREX retaining clip (c)

Retaining clip SWISSREX (spare part "c")
The retaining clip allows clamping from a minimum of 1 cm to a maximum of 7 cm.

Further information on using the retaining clamps can be found in the instructions for use.

Notes:
If your workbench top is thickerthickness, or if you want to fix the System-Workshop directly to a wallwall as an auxiliary intermediate element, attach an appropriate timber or metal profile with a minimum thickness of 4 cm and a maximum thickness of 7 cm flush with the top of the workbench in front of the workbench or directly to the wall horizontally or vertically at the desired height, depending on use.

If the workpiece is longer than the workbench:
A squared timber or metal profile of the correct length and thickness can also be used if required, extend the existing workbench,
Then clamp the squared timber or metal profile to the workbench with screw clamps and fasten the System-Workshop SWISSREX to the ends of the squared timber or metal profile. any desired length.
This construction (when not clamped to the workbench) also gives the System-Workshop SWISSREX the function of a screw clamp of any size. function of a screw clamp of any size!Important: in this function, select the squared timber or metal profile of the correct thickness!